Door bumper for many 1932-48 Buick, 1936-49 Oldsmobile and 1936-60 Cadillac closed models. Round bumper 13/16" in diameter with a 1/4" mounting hole in the center. This is the bumper mounted on the door above the upper hinge. Sold each.
Flat square door lock pillar bumper used on 1938-53 Oldsmobile convertibles and 1949-53 Holiday Coupes. Also used on 1937-53 Buick convertibles and hardtops. Metal inserted as original, retained by four screws. Sold each.
Round door lock pillar bumper for many 1949-57 Oldsmobile, 1941-60 Buick, and 1953-58 Cadillac closed models that use a screw retained bumper. Sold each, screw included.
Door lock pillar bumper for many 1937-60 Oldsmobile, 1941-60 Buick, and 1949-55 Cadillac closed models. Self retaining bumper with tab that fits into a round hole. Sold each.
Flat round door lock pillar bumper used on many 1950-60 Oldsmobiles and 1937-56 Buicks. Self retained bumper with tab that pushes into a single round hole. Sold each.
Lower door bumper for 1948-49 Cadillac club coupes, convertibles and Coupe DeVille. Also used on 1948-49 Oldsmobile 98 two door and convertible, and 1949 Buick Super and Roadmaster two door models including convertibles. Replaces GM part number 4562922. Sold each.
Upper front door bumpers used on all 1948-49 Oldsmobile 98 models except convertibles, 1948 Cadillac Series 62 two door hardtops and convertibles, and1948-49 Cadillac 60 Special and Series 61 cars. Also used on all 1949 Buick Super and Roadmaster (series 50 & 70) models including Estate Wagons. Approximately 5/8" square and 7/16" thick, with a steel core like the original. Replaces GM part number 4563219. Sold in a pair.
Oval shaped door lock pillar bumper used on many 1950-60 Oldsmobile, 1949-60 Buick and 1952-75 Cadillac applications. Self retained bumper used where there are two small round holes side by side. Sold each.
Door pillar bumper for 1959-60 Oldsmobile Holiday Coupes and convertibles. Also used on 1959-64 Cadillac models except Series 75, and 1959-64 Buicks. Measures 1 15/16 inches by 1 inch; fits into a rectangular slot. Sold each, check measurements for proper application.
Door lock pillar bumper for some 1959-64 Oldsmobile models, 1959-64 Buicks, and 1959-64 Cadillacs except Fleetwood 75. Similar in design to DB59 but shorter; measures 1 inch by 1 inch. Self retained, fits into a rectangular slot. Sold each, check measurements to confirm application.
Door lock pillar bumper for 1964-66 Cutlass and 442, and some 1963-66 Buick applications. Bumper measures 1 1/16" x 5/8" x 3/4". Two used per door, sold each.
Door lock pillar bumper used on many 1965-70 Olds 88, 98 and Starfire models. Also used on many 1967-70 Cadillac and Buick models. Similar in shape to DB90, but larger (1" x 13/16" x 5/8" thick). Typically used in conjunction with DB90, i.e. one DB90 one DB41 on each door. Sold each.
Rubber seal for door bottom drain hole on all 1957-58 Oldsmobile 88, Dynamic 88, Super 88 and 98 models. Also fits 1957-58 Buick and 1954-58 Cadillac models, and used for tailgate drain seals on 1957-58 Oldsmobile and Buick station wagons. Usually two per door. Sold each.
Rubber seal for door bottom drain holes on all 1959-60 Oldsmobile Dynamic 88, Super 88 and 98 models, and 1959-61 Cadillacs and Buicks. Typically two used per door. Sold each.
Door bottom drain hole sealing strip for 1962-72 Oldsmobile 88, 98, Starfire and Toronado models, 1965-72 Cutlass and 442, 1964 Buick LeSabre, Wildcat, Electra and Riviera, and 1965 LeSabre, Wildcat and Electra. Two used per door, sold each.
Small round domed rubber bumpers for glove box door used on all Oldsmobile from 1941-77. Used on many 1938-75 Cadillacs and 1939-75 Buicks. Also used as a gas door bumper on 1941-53 Oldsmobiles except 1950-53 76, 88 and 88A. Sold each.