Engine Bolts, Hardware and Fasteners-Fusick Automotive Products, Inc.

DEPARTMENTS

Cutlass and 442 Restoration Parts

1935-60 Oldsmobile Restoration Parts

1961-Up Oldsmobile 88-98-Starfire-Toronado

Cadillac Restoration Parts

Buick Restoration Parts (1964-72 A-Body)

Buick Restoration Parts (1936-1976)

Pontiac Restoration Parts

Chevrolet Restoration Parts

Bendix Treadlevac Rebuild Service

ACCOUNT INFO

Home > Cutlass and 442 Restoration Parts > Hardware Kits, Molding Clips and Fasteners > Engine Bolts, Hardware and Fasteners

Engine Hardware, Alternator adjuster bolts, intake manifold bolts, exhaust manifold bolts

Item #

Image

Description

Price

642HCS

Heater Cable Screw Set, 6 pieces, 1964-72 Cutlass and 442

Heater control cable screw set for 1964-72 Cutlass and 442 models. Sold in a set of six pieces.

682HBS

Heater Box Fastener Set, 1968-72 Cutlass and 442 without air conditioning

Fastener set for heater box brackets on 1968-72 Cutlass, 442 and F-85 models without air conditioning. Sold in a set of fifteen pieces.

EMB647

1964-81Cutlass 442 Exhaust Manifold Bolt Package

1964-81 and Cutlass 442 Exhaust Manifold Bolt Package - 10 bolts 1 1/4" with 3/8" shoulder, 10 washers

GS6560B

Ground Cable Bolt and Washer Set, 1968-72 Cutlass and 442

Ground cable bolt and washer set, 1968-72 Cutlass and 442.

FWC682

Firewall wiring harness clip, 1968-72 Cutlass and 442

1968-72 Cutlass 442 Firewall Wiring Harness Clip

3774

Fastener, 1961-70 radiator shroud and 1964-67 A-frame seal

Olive green metal push-in fastener used on 1961-70 Radiator shroud seals, a-frame seals, and cowl lacing. Sold each, check your car for quantity required.

VCB672

1964-74 VALVE COVER BOLT SET, 20 PIECES

Valve cover bolt set for 1964-74 Oldsmobile 330, 350, 400, 425 and 455 V8 engines. Set of 20 bolts services one engine.

VCB682

1968-72 4 Speed Valve Cover Brackets

Used on Cutlass 4 speed manual transmission cars to hold positive battery cable along valve cover on driver's side. Two metal brackets and two plastic straps

ELH647

1964-77 Engine Lift Hook

Engine lift hook for 1964-77 Oldsmobiles with V8 engines. This is the bracket that mounts at the left front corner of the intake manifold and is used as an attachment point when removing or installing the engine.

WPMK642

Water Pump, Timing Cover and Indicator Bolt Mounting Kit

Kit used on all 1964-72 Oldsmobile V8 engines and contains all the bolts needed to mount the water pump, timing case cover,and timing Indicator to the front of the engine.

FMK616

1961-76 V8 Fan Mounting Bolt Kit

1961-76 Fan blade mounting kit. Bolts used to attach the fan 1961-77 all models.

FCMK616

Fan and Fan Clutch Bolt Kit, 1961-76 Oldsmobile V8

Bolts used to mount the fan and clutch on 1961-77 Olds V8

SBS645

Starter shield, 1972-77 Oldsmobile V8

1972-77 Oldsmobile all V8 Starter Bracket Shield. Heat shield serves as a barrier between the exhaust and starter as well as a brace from the starter housing to the engine block and can be used on 1964-71 Oldsmobile V8's to replace the existing brace.

SBS645A

Starter brace, 1964-72 Oldsmobile V8

Starter brace used on all 1964-72 Olds V8

IBK647

Intake Manifold Bolt Package, 1964-77 Oldsmobile V8

Intake manifold bolt package for 1964-77 Oldsmobile V8 engines. Set includes eight 1 7/8" and four 1 1/4" no shoulder bolts, and ten washers in black oxide finish as original.

EML65

Exhaust manifold lock, 1964-81 Oldsmobile V8

Two hole lock washers used on all 1964-81 Oldsmobile V8 engines except 1964 394. Locks attach to front two bolts and rear two bolts on the exhaust manifolds. Four locks used per car, sold individually.

642MMB

Motor Mount Bolt Kit, 1964-72 Cutlass, 442 V8

Motor mount bolt kit for 1964-72 Cutlass, 442 and F-85 V8 models. Complete 36 piece package includes bolts, washers, and contact nuts.