Hood, Door, Trunk and Body Rubber Bumpers-www.fusickautomotiveproducts.com

/ / / /

1 2 3 LAST

Glove box bumpers, gas door bumpers, license plate bumpers, door lock pillar bumpers, trunk bumpers, hood bumpers, door jamb light switch pads, drain hole covers, bumper bar grommets, gear shift lever boots, rubber mounting pads, cowl drain tubes, cowl lacing strips, cowl bumpers, radiator baffle seals, firewall grommets, light wire grommets, body and floor pan plugs, windshield wiper transmission mounting pads, convertible top mounting grommets

Image

Item #

Description

Price

GB10

Glove Box Rubber Bumper - Oldsmobile 1941-77, Buick 1939-75, Cadillac 1938-75
Small round domed rubber bumpers for glove box door used on all Oldsmobile from 1941-77. Used on many 1938-75 Cadillacs and 1939-75 Buicks. Also used as a gas door bumper on 1941-53 Oldsmobiles except 1950-53 76, 88 and 88A. Sold each.

In Stock

GB560

Glove Box Hinge Grommet
Self retaining oval rubber grommet installs into dash and around glove box. For all 1956-60 Oldsmobile 88, Super 88 and 98 models, 1950-53 Cadillacs and 1956-58 Buicks.

In Stock

GB15

1950-56 Gas Door Bumpers (pair)

Includes mounting screws. Sold as a pair.

1950-53 Oldsmobile 76, 88, and 88A models

1954-56 Oldsmobile 88, Super 88 amd 98 models

In Stock

GB20

Gas Door Bumpers, pair, 1957 Oldsmobile
Gas door bumpers for all 1957 Oldsmobile 88, Super 88 and 98 models. Sold as a pair only.

In Stock

LB558

License Plate Rubber Bumper, 1955-58 Oldsmobile
Rear license plate bumper for all 1955-58 Oldsmobile 88, Super 88 and 98 models. Fits in rear bumper behind license plate.

In Stock

DB65

Door Lock Pillar Bumper, 1950-60 Oldsmobile, 1937-56 Buick
Flat round door lock pillar bumper used on many 1950-60 Oldsmobiles and 1937-56 Buicks. Self retained bumper with tab that pushes into a single round hole. Sold each.

In Stock

DB80

Door Lock Pillar Bumper, 1950-60 Oldsmobile, 1949-60 Buick, 1952-75 Cadillac
Oval shaped door lock pillar bumper used on many 1950-60 Oldsmobile, 1949-60 Buick and 1952-75 Cadillac applications. Self retained bumper used where there are two small round holes side by side. Sold each.

In Stock

DB383

Door bumper, 1938-53 Oldsmobile, 1937-53 Buick
Flat square door lock pillar bumper used on 1938-53 Oldsmobile convertibles and 1949-53 Holiday Coupes. Also used on 1937-53 Buick convertibles and hardtops. Metal inserted as original, retained by four screws. Sold each.

In Stock

DB45

Door lock pillar bumper, 1937-60 Olds, 1941-60 Buick, 1949-55 Cadillac
Door lock pillar bumper for many 1937-60 Oldsmobile, 1941-60 Buick, and 1949-55 Cadillac closed models. Self retaining bumper with tab that fits into a round hole. Sold each.

In Stock

DB50

Door Lock Pillar Bumper, 1949-57 Oldsmobile, 1941-60 Buick,1953-58 Cadillac
Round door lock pillar bumper for many 1949-57 Oldsmobile, 1941-60 Buick, and 1953-58 Cadillac closed models that use a screw retained bumper. Sold each, screw included.

In Stock

DB59

Door Lock Pillar Bumper, 1959-64 Oldsmobile, 1959-64 Cadillac and Buick
Door pillar bumper for 1959-60 Oldsmobile Holiday Coupes and convertibles, and 1961-64 88, Starfire and 98 2 door models. Also used on 1959-64 Cadillac models except Series 75, and 1959-64 Buicks. Measures 1 15/16 inches by 1 inch; fits into a rectangular slot. Sold each, check measurements for proper application.

In Stock

DB59A

Door Lock Pillar Bumper, 1959-64 Oldsmobile, Cadillac and Buick
Door lock pillar bumper for some 1959-64 Oldsmobile models, 1959-64 Buicks, and 1959-64 Cadillacs except Fleetwood 75. Similar in design to DB59 but shorter; measures 1 inch by 1 inch. Self retained, fits into a rectangular slot. Sold each, check measurements to confirm application.

In Stock

DB60

Door Lock Pillar Bumper, 1957-60 Oldsmobile and Buick
Door lock pillar bumper used on 1957-60 Oldsmobile and Buick four door sedans. Self retaining, fits into a rectangular slot. Sold each.

In Stock

TB41

Trunk ledge bumper, 1941-49 Oldsmobile
Trunk ledge bumper for most 1941-49 Oldsmobile models. Sold each.

In Stock

TB54

Trunk ledge bumper and adjuster, 1954-56 Oldsmobile
Trunk ledge bumper and adjuster for all 1954-56 88, Super 88 and 98 models. Metal adjuster with rubber cushion as original. Sold each.

In Stock

TB56

Trunk ledge bumper, 1950-58 Oldsmobile
Trunk ledge bumper used on all 1950-53 76, 88, 88A, Super 88, 98 and Fiesta, and 1957-58 88, Super 88 and 98. Sold each.

In Stock